Questions & discussions of garage door operator problems and solutions.

Latest topics

» Seal your garage door
Today at 3:00 am by brooklynnygarage

» Pole Barn Door Opener
Sat Aug 19, 2017 12:13 pm by OldBlue

» need to get garage door open
Sat Aug 19, 2017 7:11 am by benchbella

» advise on garage repair in phoenix az
Fri Aug 18, 2017 11:02 am by sandykiwi66

» Garage door not opening.
Fri Aug 18, 2017 11:00 am by sandykiwi66

» What is the best garage door for all homes?
Fri Aug 18, 2017 10:57 am by sandykiwi66

» Welcome To The Forums
Mon Aug 14, 2017 6:55 am by queensgarage

» What goes into the cost of a commercial garage door?
Mon Aug 14, 2017 6:50 am by queensgarage

» What type of spring is better...extension or torsion?
Mon Aug 14, 2017 5:04 am by njoverheadgaragedoors

Buy Marantec Remotes

Buy Raynor Remotes

Buy Raynor Remotes

Counter


    Raynor Pilot

    Share

    hawnbiz

    Posts : 3
    Join date : 2016-10-26

    Raynor Pilot

    Post  hawnbiz on Wed Oct 26, 2016 12:11 am

    I have a Raynor Pilot Garage Door Opener. For some reason when I replaced the dead light bulb the new one doesn't turn on. When I put it in again, sometimes it flickers for a split second so I know it's kinda working. Is there something I'm not doing right? I've been replacing these bulbs several times since having it for over 16 years and up until now had no problems...
    avatar
    GDZone
    Admin

    Posts : 208
    Join date : 2009-04-28

    Re: Raynor Pilot

    Post  GDZone on Wed Oct 26, 2016 1:18 am

    Unplug the operator & remove the cover. You'll see two prongs on the light socket with leads going to the logic board. Make sure that those two wires are on tight. If one is loose it could cause the light to flicker.


    _________________
    Brian

    Garage Door Zone

    Visit GarageDoorZone.com
    Like Us On Facebook
    Join Us On Twitter
    Sign Up For Our Newsletter

    hawnbiz

    Posts : 3
    Join date : 2016-10-26

    Re: Raynor Pilot

    Post  hawnbiz on Wed Nov 16, 2016 6:17 am

    GDZone wrote:Unplug the operator & remove the cover. You'll see two prongs on the light socket with leads going to the logic board. Make sure that those two wires are on tight. If one is loose it could cause the light to flicker.
    I tried this to no avail.

    hawnbiz

    Posts : 3
    Join date : 2016-10-26

    Re: Raynor Pilot

    Post  hawnbiz on Wed Nov 16, 2016 6:18 am

    I switched light bulb to normal type and it works! Apparantly, if using those special types, the nipples are shorted and barely touches the contacts as the normal ones do...

    Brownieboy361

    Posts : 4
    Join date : 2016-11-21

    Re: Raynor Pilot

    Post  Brownieboy361 on Tue Nov 22, 2016 8:19 am

    hawnbiz wrote:I switched light bulb to normal type and it works! Apparantly, if using those special types, the nipples are shorted and barely touches the contacts as the normal ones do...
    Somtimes going back to basics will fix the problem then I guesss lol
    avatar
    brooklynnygarage

    Posts : 52
    Join date : 2016-11-22
    Age : 27
    Location : 23 Bleecker ST Brooklyn, NY-11221

    Re: Raynor Pilot

    Post  brooklynnygarage on Mon Mar 27, 2017 4:26 am

    Hi we are the trusted garage door repair company. Please contact us. garage door repair Brooklyn

    Sponsored content

    Re: Raynor Pilot

    Post  Sponsored content


      Current date/time is Mon Aug 21, 2017 3:24 am