Need to replace lost remote. Raynor 170-7 serial # 50593 built 12/93. No sign of "learn" button or 8/9 three position switches. Has Chamberlain 500 RGD receiver attached to back of unit 12/93.
If you remove the receiver from the back of the operator you should find the 9 DIP switches used for programming. You can use the 61RGD Remote. Just match the switches in the remote to the one's in the receiver.
EDIT: Sorry I just realized that info above is for a different receiver. If you take the small door off the front of the receiver (it probably has "Chamberlain" or "Liftmaster" printed on it) using a small screw driver you'll find the program button. The 61RGD I suggested will work with the 500RGD receiver.
Tue Mar 26, 2024 8:49 am by besnos
» Replacing faulty Logic Board
Tue Mar 26, 2024 4:25 am by cr-garagedoor
» liftmaster 8500 Gors down to ground stops and goes up
Tue Mar 26, 2024 4:19 am by cr-garagedoor
» Door wont close with remote
Fri Mar 22, 2024 6:02 am by cr-garagedoor
» open closed then nothing
Fri Mar 22, 2024 5:35 am by cr-garagedoor
» Professional Tow Dolly Services in Garden City NY
Tue Mar 19, 2024 6:12 am by johannimartin
» How To Find All Upcoming Birthdays on Facebook
Tue Mar 19, 2024 4:47 am by johannimartin
» Best Inground Pool Installation Services in Frisco TX
Mon Mar 18, 2024 8:06 am by jonemartin
» How to Fix QuickBooks Error Code 12007?
Fri Mar 08, 2024 7:13 am by jonemartin