I have a Liftmaster 800 opener, and have been using a Chamberlain 1A5478 remote with it. Access is now need by two people, so I need to program another remote - I bought a generic 433 MHz rolling code four-button remote.
If I clear the original remote, I can program either the replacement or the original (by holding down button "A" after pressing "Learn", waiting for the flashing LED and the flash of the opener's light), but I cannot subsequently program a second (either the Chamberlain or the generic one) - holding the remote button does not make the Learn LED flash; in fact nothing at all happens.
Is there a specific process to add a second remote?
Thanks in advance.
If I clear the original remote, I can program either the replacement or the original (by holding down button "A" after pressing "Learn", waiting for the flashing LED and the flash of the opener's light), but I cannot subsequently program a second (either the Chamberlain or the generic one) - holding the remote button does not make the Learn LED flash; in fact nothing at all happens.
Is there a specific process to add a second remote?
Thanks in advance.
Today at 6:42 am by jonemartin
» Clinical trials
Tue Mar 26, 2024 8:49 am by besnos
» Replacing faulty Logic Board
Tue Mar 26, 2024 4:25 am by cr-garagedoor
» liftmaster 8500 Gors down to ground stops and goes up
Tue Mar 26, 2024 4:19 am by cr-garagedoor
» Door wont close with remote
Fri Mar 22, 2024 6:02 am by cr-garagedoor
» open closed then nothing
Fri Mar 22, 2024 5:35 am by cr-garagedoor
» Professional Tow Dolly Services in Garden City NY
Tue Mar 19, 2024 6:12 am by johannimartin
» How To Find All Upcoming Birthdays on Facebook
Tue Mar 19, 2024 4:47 am by johannimartin
» Best Inground Pool Installation Services in Frisco TX
Mon Mar 18, 2024 8:06 am by jonemartin