I have seen the videos of how to level the door. The right side has about an inch of daylight coming through. I have ordered torsion bars. My question is, my door is a two car custom wood door. It’s very heavy. There are four torsion springs, two on each side connected together. My question is is it safe for me to do this by myself? I’m just making sure that I can handle the amount of torque on the spring when loosening the set screw on the torsion spring and allowing the bar to rest on the door so I can then proceed with adjusting the set screws on the drum. Thanks.
Yesterday at 9:16 am by gutsy
» myQ garage randomly opens on its own
Yesterday at 6:42 am by jonemartin
» Clinical trials
Tue Mar 26, 2024 8:49 am by besnos
» Replacing faulty Logic Board
Tue Mar 26, 2024 4:25 am by cr-garagedoor
» liftmaster 8500 Gors down to ground stops and goes up
Tue Mar 26, 2024 4:19 am by cr-garagedoor
» Door wont close with remote
Fri Mar 22, 2024 6:02 am by cr-garagedoor
» open closed then nothing
Fri Mar 22, 2024 5:35 am by cr-garagedoor
» Professional Tow Dolly Services in Garden City NY
Tue Mar 19, 2024 6:12 am by johannimartin
» How To Find All Upcoming Birthdays on Facebook
Tue Mar 19, 2024 4:47 am by johannimartin