Garage Door Zone

Would you like to react to this message? Create an account in a few clicks or log in to continue.
Garage Door Zone

Questions & discussions of garage door operator problems and solutions.

Latest topics

» myQ garage randomly opens on its own
travel - Lift Master 8065 Travel Programming Issue EmptyToday at 6:42 am by jonemartin

» Clinical trials
travel - Lift Master 8065 Travel Programming Issue EmptyTue Mar 26, 2024 8:49 am by besnos

» Replacing faulty Logic Board
travel - Lift Master 8065 Travel Programming Issue EmptyTue Mar 26, 2024 4:25 am by cr-garagedoor

» liftmaster 8500 Gors down to ground stops and goes up
travel - Lift Master 8065 Travel Programming Issue EmptyTue Mar 26, 2024 4:19 am by cr-garagedoor

» Door wont close with remote
travel - Lift Master 8065 Travel Programming Issue EmptyFri Mar 22, 2024 6:02 am by cr-garagedoor

» open closed then nothing
travel - Lift Master 8065 Travel Programming Issue EmptyFri Mar 22, 2024 5:35 am by cr-garagedoor

» Professional Tow Dolly Services in Garden City NY
travel - Lift Master 8065 Travel Programming Issue EmptyTue Mar 19, 2024 6:12 am by johannimartin

» How To Find All Upcoming Birthdays on Facebook
travel - Lift Master 8065 Travel Programming Issue EmptyTue Mar 19, 2024 4:47 am by johannimartin

» Best Inground Pool Installation Services in Frisco TX
travel - Lift Master 8065 Travel Programming Issue EmptyMon Mar 18, 2024 8:06 am by jonemartin

Counter


3 posters

    Lift Master 8065 Travel Programming Issue

    avatar
    rjarzabek


    Posts : 1
    Join date : 2018-06-09

    travel - Lift Master 8065 Travel Programming Issue Empty Lift Master 8065 Travel Programming Issue

    Post  rjarzabek Sat Jun 09, 2018 10:18 pm

    Please help.
     down/close travel issue on LiftMaster 8065
    Lift Master 8065 1/2 HP  (June  2016)  almost new chain drive  closing/down travel issues.
    Safeties OK  orange /green, door stays balanced  and in place  at any position. I checked the rollers and open door manually up/down no force no binding.Checked and  adjusted chain tension. Checked chain sprocket  and inside shaft  and worm gear. No alarms from bulb/clicks while programming. Error code Up 4flashes  Down arrow 1 flash
    When I program travel up arrow doesn’t give me any issues  going UP goes up continuously. When I try to adjust back down little  it will travel only about 6 inches and stops on its own.  Once I set up open travel limit   and press /release  middle button down arrow flashes like it supposed to . 
    Now ,trying to set close  travel carriage  travels only about 6 inches and stops. It  will not go again until I adjust up arrow little and than I can move down again another 6 inches and so on all the way I want.
    I research little and thinking about replacing Travel Module 041D7742-T
    Please help.
    Just went to check on something for accuracy after plugging power back and testing I got  5 blinks/clicks from the bulb
    Thank you 
    ricks
    ricks


    Posts : 3
    Join date : 2018-06-13

    travel - Lift Master 8065 Travel Programming Issue Empty Re: Lift Master 8065 Travel Programming Issue

    Post  ricks Wed Jun 13, 2018 12:38 pm

    After setting your limits, try unplugging the power supply for at least 5 minutes and see how it works.
    avatar
    hughesgaragedoorsystems


    Posts : 4
    Join date : 2018-02-25
    Age : 60
    Location : Breckenridge, Texas

    travel - Lift Master 8065 Travel Programming Issue Empty Liftmaster 8065

    Post  hughesgaragedoorsystems Tue Jun 19, 2018 10:05 am

    I had this trouble with the 8365's. Six of them to be exact.

    i don't know what happened...

    I erased everything in the heads. Unplugged them for a good 30 seconds. Shortened the contact of bell wire in the head on sensors.. Tugged on them to make sure they were tight in contact. The only thing I done different was slowed down this time on pressing buttons. I set the upside waited about 5 seconds. Pressed set button (middle) the the down arrow came on. Pressed arrow and held it in firmly until I got the bottom position I wanted then waited for about 5 seconds and locked it in. I had no more trouble afterwards.

      The same happened with the Wireless Keypad too. In the eleven years I have been in the business? This has never happened before. Hopefully I've helped. Joe here

     I know I am posting this well after the problem. But this above information may help someone else in the future.

    Sponsored content


    travel - Lift Master 8065 Travel Programming Issue Empty Re: Lift Master 8065 Travel Programming Issue

    Post  Sponsored content


      Current date/time is Thu Mar 28, 2024 7:50 am