Questions & discussions of garage door operator problems and solutions.

Latest topics

» Light Duty Commercial opener repair, conflicting expert advice??
Sun Jan 21, 2018 12:51 pm by Ed Salter

» How do I paint a Garaga garage door?
Fri Jan 19, 2018 6:04 am by JosephClements

» Help leveling garage door
Fri Jan 19, 2018 6:00 am by JosephClements

» Garage door puzzle. Will it open this time?
Fri Jan 19, 2018 5:59 am by JosephClements

» Raynor garage door 110-7
Fri Jan 12, 2018 1:42 pm by GDZone

» Local Canadian Supplier of Garage Door Openers
Fri Jan 12, 2018 9:53 am by doormasterdan

» Receiving sensor led always on - follow-up
Tue Jan 09, 2018 3:57 pm by wayne64

» Garage Opener Rail Clearance
Mon Jan 08, 2018 2:15 am by GDZone

» Garge door opener Rail space Issue
Sat Jan 06, 2018 9:57 pm by jadadoors

Buy Marantec Remotes

Buy Raynor Remotes

Buy Raynor Remotes

Counter


    Marantec MAC Lift Elite 2007 wont stop at travel limits

    Share

    hmayr

    Posts : 2
    Join date : 2012-12-01

    Marantec MAC Lift Elite 2007 wont stop at travel limits

    Post  hmayr on Sat Dec 01, 2012 3:50 pm

    I had a power outage the other day. Ever since my garage door won't stop at the programmed travel limits (up or down).
    All other functions seem to work just fine.
    Reprogrammed travel limits several times but no change.
    Unplugged it for an hour, hoping to reset the electronics - not change.
    Does the system have a reboot option?
    Any suggestions on this issue?
    avatar
    GDZone
    Admin

    Posts : 233
    Join date : 2009-04-28

    Re: Marantec MAC Lift Elite 2007 wont stop at travel limits

    Post  GDZone on Sat Dec 01, 2012 7:35 pm

    It sounds like maybe the limit "dog" (or piece) that attaches to the chain (or belt)and activates the limit switch (telling the opener to stop) may have come off. Or the limit switch itself is no longer working properly.

    hmayr

    Posts : 2
    Join date : 2012-12-01

    Re: Marantec MAC Lift Elite 2007 wont stop at travel limits

    Post  hmayr on Tue Dec 04, 2012 2:05 am

    There is not limit "dog" present. I looked through the manual and the installation instructions. Nor reference to something like this.
    The limits are programmed through the programming mode.

    Thanks for suggestion.
    avatar
    GDZone
    Admin

    Posts : 233
    Join date : 2009-04-28

    Re: Marantec MAC Lift Elite 2007 wont stop at travel limits

    Post  GDZone on Tue Dec 04, 2012 2:23 am

    If you have Mac-Lift manual you can see the limit on the belt on page 25. There's a small gray square on the picture of the belt (under the number 11)...that is the limit. On page 26 look at Number 4 (part #8054389)...Marantec calls it a Reference Switch which is the Limit Switch. If you don't have a manual you can go to www.marantecamerica.com to see or print one.

    Hope this helps.

    Sponsored content

    Re: Marantec MAC Lift Elite 2007 wont stop at travel limits

    Post  Sponsored content


      Current date/time is Tue Jan 23, 2018 3:14 am