Hi all,
I'm new here and joined to hopefully gain from the knowledge and experience of those in this forum.
I recently purchased a set of 2 lightly used Liftmaster door openers and have installed one. They didn't come with remotes so I purchased remote openers and remote keypads that are supposed to be compatible with this class of LiftMaster opener (has the yellow 'learn' button) I installed the first one, setup MyQ and It works as expected however; I can't get the learn feature to pick up on either a remote opener of remote keypad. I followed the pairing instructions to the letter over and over using both the remotes and the remote keypad but...bupkis!! I can open and close the opener remotely using the MyQ app over the web from my smartphone but the learn function simply won't 'learn' any remote devices. The yellow light just glows yellow....no lights blinking, no beeps!
Today I figured since I have two identical openers, I could swap out the logic board panel for the unit I still need to install. It was very simple to do. I configured the 'new' logic board for up and down travel, etc and connected to the internet with no issue. I expected the learn function to work using the second board but, to my surprise, that didn't fix the problem.
At this point I'm stumped and a bit frustrated. Any recommendations from the folks here would be greatly appreciated!
I'm new here and joined to hopefully gain from the knowledge and experience of those in this forum.
I recently purchased a set of 2 lightly used Liftmaster door openers and have installed one. They didn't come with remotes so I purchased remote openers and remote keypads that are supposed to be compatible with this class of LiftMaster opener (has the yellow 'learn' button) I installed the first one, setup MyQ and It works as expected however; I can't get the learn feature to pick up on either a remote opener of remote keypad. I followed the pairing instructions to the letter over and over using both the remotes and the remote keypad but...bupkis!! I can open and close the opener remotely using the MyQ app over the web from my smartphone but the learn function simply won't 'learn' any remote devices. The yellow light just glows yellow....no lights blinking, no beeps!
Today I figured since I have two identical openers, I could swap out the logic board panel for the unit I still need to install. It was very simple to do. I configured the 'new' logic board for up and down travel, etc and connected to the internet with no issue. I expected the learn function to work using the second board but, to my surprise, that didn't fix the problem.
At this point I'm stumped and a bit frustrated. Any recommendations from the folks here would be greatly appreciated!
Today at 5:59 am by emailbuzz
» LED flashing on wall control, not in lock mode
Yesterday at 9:01 am by Mkhoury
» How to edit your birthday on Facebook?
Thu May 02, 2024 6:05 am by Allinsider
» Clinical Trials Poland
Tue Apr 30, 2024 9:25 am by Altrio
» Is Impotence a Sign of an Underlying Health Condition?
Tue Apr 30, 2024 3:12 am by ameliajames
» Old Genie BlueMax resistance adjustment sensor
Mon Apr 29, 2024 9:19 pm by Bob52
» QR code menu
Mon Apr 29, 2024 1:34 pm by lefeni
» KDE's great video edito
Mon Apr 29, 2024 1:32 pm by lefeni
» Where is the microphone in iPhone 11?
Mon Apr 29, 2024 1:29 pm by lefeni