Need to replace lost remote. Raynor 170-7 serial # 50593 built 12/93. No sign of "learn" button or 8/9 three position switches. Has Chamberlain 500 RGD receiver attached to back of unit 12/93.
Garage Door Zone
Questions & discussions of garage door operator problems and solutions.
2 posters
remote for Raynor 170-7 garage door opener
gramps59- Posts : 1
Join date : 2012-12-30
GDZone- Admin
- Posts : 340
Join date : 2009-04-28
If you remove the receiver from the back of the operator you should find the 9 DIP switches used for programming. You can use the 61RGD Remote.
Just match the switches in the remote to the one's in the receiver.
EDIT: Sorry I just realized that info above is for a different receiver. If you take the small door off the front of the receiver (it probably has "Chamberlain" or "Liftmaster" printed on it) using a small screw driver you'll find the program button. The 61RGD I suggested will work with the 500RGD receiver.
Have a great New Years!
Just match the switches in the remote to the one's in the receiver.
EDIT: Sorry I just realized that info above is for a different receiver. If you take the small door off the front of the receiver (it probably has "Chamberlain" or "Liftmaster" printed on it) using a small screw driver you'll find the program button. The 61RGD I suggested will work with the 500RGD receiver.
Have a great New Years!
|
|
|
» installed a right hand spring for door. what drums to use
» Repair My Garage Door Aurora
» Linear garage door opener lubrication
» Can you flip a wood garage door to extend its life?
» Door goes up about a foot, stops
» Any garage door openers still made with doorbell-style buttons
» Continually reversing door travel
» Garage Door Repair