Raynor model 170-7 will not close using remote. This intermittent problem started when the weather turned really cold. When the door has been opened, sometimes there is a relay clicking at the motor. It sounds like the electric eye relay but the electric eyes stay green. Holding the wall switch will close the door? Thanks.
Garage Door Zone
Questions & discussions of garage door operator problems and solutions.
3 posters
Raynor model 170-7 will not close using remote
JoeIllinois- Posts : 1
Join date : 2013-12-17
GDZone- Admin
- Posts : 340
Join date : 2009-04-28
There's definitely a problem with the safety sensors. It's likely one of the following problems: 1.) The sensors are dirty - clean the lens off with a damp cloth. 2.) The wires are either loose or corroded - check wires on end of sensors for corrosion and make sure the connections are tight at the powerhead. 3.) The sensors are misaligned - check alignment & make sure brackets haven't been bumped. 4.) The sensors have failed - replace both sensors.
Hope this helps.
Hope this helps.
orenlinder- Posts : 10
Join date : 2014-03-27
Age : 44
Location : NJ, USA
Why don't you go with a garage door professional to discuss the issue. Hope they can help you in a good way.
» Cenforce 25 mg: A Gentle Start to Enhanced Men’s Wellness
» Room GPT: Your AI Companion for Seamless Interior Design
» Sensing that your Internet
» I found out by myself why my garage door opening unevenly
» Ufabet เว็บแม่ API แท้จากบริษัทแม่ 100% มาตรฐานสากล
» Jobs in Dubai: Opportunities, Requirements, and Tips for Success
» How much mebendazole should I take for worms?
» Jobs in Dubai: Opportunities Await in the City of Dreams