Opener head died, like it had no power going to it.
Verified the AC outlet it was plugged into was good.
No obvious signs of internal damage like burned capacitors, etc.
I found a good used circuit board on eBay, same exact part number, which brought the head back to life, but it will only click when pushing the paired remote button, the motor will not turn on.
At this point, maybe easiest just to replace whole head. Local Raynor dealer wants $700 installed to do the job.
Any chamberlain branded opener head equivalents for this part number? It’s an Endeavor 3/4hp belt drive for what it’s worth.
Verified the AC outlet it was plugged into was good.
No obvious signs of internal damage like burned capacitors, etc.
I found a good used circuit board on eBay, same exact part number, which brought the head back to life, but it will only click when pushing the paired remote button, the motor will not turn on.
At this point, maybe easiest just to replace whole head. Local Raynor dealer wants $700 installed to do the job.
Any chamberlain branded opener head equivalents for this part number? It’s an Endeavor 3/4hp belt drive for what it’s worth.
» Exploring Reviews of Legal and Trusted Online Casinos with OnlineCasinosSouthAfrica
» Garage door opens then door goes back a few inches then opens again...
» Door closing with loud noise, any suggestions
» Garage door not opening
» Commercial Garage Door Installation
» Garage Door Repair
» Garage door still can open and close in a power outage
» Tips For Installation Of Garage Door